Microphone Inputs |
|
---|---|
All measurements were taken at minimum gain, Z In: medium unless otherwise stated. Measurements taken at the analogue outputs |
|
Gain Range |
0 to 30 dB or 30 to 60 dB (with ‘30-60’ switch enabled), in 10 dB steps, plus 0 to 20 dB of continuous trim |
Maximum Input Level |
+7 dBu |
Input Impedance |
Transformer balanced, Low: 600 Ω, ISA 110: 1.4 kΩ, Medium: 2.4 kΩ, High: 6.8 kΩ |
Signal-to-Noise Ratio |
122 dB ‘A’-Weighted (typical), maximum gain |
Frequency Response |
20 Hz – 20 kHz ± 0.2 dB | 10 Hz – 110 kHz ± 1.5 dB |
THD+N |
-92 dB (0.0025%) @ -1 dBr |
High-Pass Filter |
75 Hz knee frequency, 18 dB/octave |
Noise EIN (A-Weighted) |
<-123 dBu maximum gain |
Common Mode Rejection Ratio |
-93 dB @ 1kHz |
Line Inputs |
|
---|---|
All measurements were taken at minimum gain, Z In: Low, unless otherwise stated, RS = 50 Ω. Measurements taken at the analogue outputs |
|
Gain Range |
-20 to +10 dB in 10 dB steps, plus 0 to 20 dB continuous trim |
Maximum Input Level |
+25 dBu |
Input Impedance |
Electronically balanced 10 kΩ |
Signal-to-Noise Ratio |
122 dB ‘A’-Weighted (typical), maximum gain |
Frequency Response |
20 Hz – 20 kHz ± 0.1 dB | 10 Hz – 122 kHz ± 3 dB unity gain |
THD+N |
-91 dB (0.0028%) @ -1 dBr |
High-Pass Filter |
75 Hz knee frequency, 18 dB/octave |
Common Mode Rejection Ratio |
-65 dB @ 1 kHz |
Instrument Inputs |
|
---|---|
All measurements were taken at minimum gain, Z In: Low, unless otherwise stated, RS = 600 Ω. Measurements taken at the analogue outputs |
|
Gain Range |
+10 to +40 dB continuous, using Trim pot |
+18 dBu |
|
Low: 470 kHz, High: 2.4 MΩ |
|
100 dB ‘A’-Weighted |
|
20 Hz – 20 kHz ±0.1 dB | 10 Hz – 110 kHz ± 1.2 dB |
|
-83 dB (0.0071%) @ -1 dBFS |
|
75 Hz knee frequency, 18 dB/octave |
Connectivity |
|
---|---|
Front panel |
|
Instrument input / Amp output |
2 x 1/4” mono jack |
Rear Panel |
|
Microphone input |
XLR-3 female |
Line level input Main output DI output |
1/4” balanced jack & XLR-3 female XLR-3 male XLR-3 male |
Insert send Insert return |
1/4” balanced jack 1/4” balanced jack |
Cue Mix inputs L & R |
2 x 1/4” balanced jack |
Digital Card Slot |
|
Compatible card |
ISA ADN2 |
Crosstalk |
|
---|---|
All measurements were taken at minimum gain, Z In: Medium |
|
Microphone Inputs |
-60 dB, 20 Hz – 20 kHz |
Line Inputs |
-80 dB, 20 Hz – 20 kHz |
Instrument Inputs |
-80 dB, 20 Hz – 20 kHz |
Dimensions |
|
---|---|
Height |
104mm / 4.1” |
Width |
220mm / 8.7” |
Depth |
290mm / 11.4” |
Weight |
|
---|---|
Weight |
3.9 kg / 8.59 lbs |
Power |
|
---|---|
PSU |
1 x Internal, 100 – 240 V, 50 / 60 Hz |
Consumption |
Environmental |
|
---|---|
Operating Temperature |
40°C / 104°F Maximum ambient operating temperature |