This User Guide applies to both the RedNet 6 and RedNet D64R MADI Bridge interfaces. It provides information about installing each unit and how either can be connected into your system.
All references relating to the RedNet 6 are also applicable to the RedNet D64R. In any instances where names or values differ, the screening or value for the D64R unit will be appended in square brackets, e.g., “Power [PSU A]”.
D64R:
Any information relevant to only one device will be separated like this.
A RedNet System User Guide is also available from the RedNet product pages of the Focusrite website. The Guide provides a detailed explanation of the RedNet system concept, that will help you achieve a thorough understanding of its capabilities. We recommend all users, including those already experienced in digital audio networking, take the time to read through the System User Guide so that they are fully aware of all the possibilities that RedNet and its software have to offer.
If this user guide doesn't include the information you need, you can find a collection of common technical support queries at:
Note
To download this user guide in PDF format, go to: downloads.focusrite.com.
-
RedNet 6 [D64R] unit
-
1 [2] x IEC AC mains cables
-
2 x IEC mains cable retaining clips (See IEC Power Cord Retaining Clip)
-
2m Cat 6 Ethernet cable [D64R only]
-
Safety information cut sheet [RedNet 6 only]
-
RedNet Getting Started Guide
-
Product registration card, provides links to:
-
RedNet Control
-
RedNet PCIe drivers (included with RedNet Control download)
-
Audinate Dante Controller (installed with RedNet Control)
-
Dante Virtual Soundcard (DVS) Token and download instructions
-