This user guide is applicable to all units in the Red range of Thunderbolt Interfaces: Red 4Pre, Red 8Pre, Red 8Line and Red 16Line. It provides information about installation, operation and how each unit can be connected to your home or studio system.
Note
To download this user guide in PDF format, go to: downloads.focusrite.com.
-
Where channel quantities differ between each device, the channel counts are shown in squared brackets in the order: [Red 4Pre / Red 8Pre / Red 8Line / Red 16Line].
Eg., “Connectors for the [4/8/2/2] microphone inputs are located on the rear panel.”
-
Individual specification differences will be indicated by notes eg., “(Not available on Red 16Line)”
-
Where there are significant specification variations, a separate page is used for each version.
Audinate® and Dante® are registered trademarks of Audinate Pty Ltd.
Thunderbolt™ is a trademark of Intel Corporation or its subsidiaries in the U.S. and/or other countries.
-
Red range unit
-
IEC AC mains cable
-
2m Thunderbolt 2 cable (Red 4Pre and Red 8Pre)
-
2m Thunderbolt 3 cable – 20Gbps, 60W (Red 8Line and Red 16Line)
-
Product registration card, which provides the following important information:
-
Unit serial number
-
Bundle code – for registering your product and for accessing your free software
-
-
An Apple Mac with at least one Thunderbolt, Thunderbolt 2 or Thunderbolt 3 port, or a Pro Tools | HD system for mini DigiLink connection.
An Apple Thunderbolt 3 to Thunderbolt 2 adapter and a Thunderbolt 2 cable will be required to connect any Thunderbolt or Thunderbolt 2 ports to a Thunderbolt 3 port
-
See support.focusrite.com for information on OS compatibility
-
Internet connection for downloading and installing software and driver