Skip to main content

Global Settings

Updated

Press the Meter and Monitor buttons simultaneously to enter the Global settings menu.

Red_Range_Output_Encoder_Meter_and_Monitor_Selected.png
Red_Range_Global_Menu.png

  • Rotate the Output Encoder to select a menu item

  • Click the Output Encoder to step through the available options

To exit the Global settings screen press the Monitor button (or select the ‘Back’ option).

Host

Selects the connection used for the DAW host: Thunderbolt or Pro Tools. In Thunderbolt mode the Lock flag will show as locked whenever there is a connection to a Thunderbolt machine – whether or not a DAW is open; Pro Tools mode will require DAW connectivity to show lock.

Note

Changing the Host type will cause the device to perform a power reset.

Sync

Red_Range_Monitor_Display.png

Selects the unit’s sync source:

  • Internal – Internally generated. This is the default selection

  • Word Clock – Received via the BNC Word Clock In connector

  • ADAT 1 – Received via the rear Optical In 1-8 connector

  • ADAT 2 – Received via the rear Optical In 9-16 connector

  • S/PDIF – Received via either the rear RCA In connector or Optical port 1 when set to ‘Optical-S/PDIF’

  • Dante – Provided by the Dante network connection

  • Loop Sync – Only applicable when in ‘Pro Tools Host’ mode

When sync is established, the Lock status will change to green. A red flag indicates no sync.

Retain

Choose whether the previous phantom power settings for Mic inputs are restored on power-up:

  • Preamp – All previous settings are returned except the 48V settings, which will be set to Off. This is the default selection

  • Preamp +48V – All previous settings are returned

Related articles