Vocaster Hub's Mix section

The Mix Section at the bottom of Vocaster Hub has all the input channels to your ‘Show Mix’ listed with a Slider, Meter, and Mute button.

Sliders and Mutes

The Sliders and Mute buttons adjust the level going to your Show Mix (headphone/speaker mix) and Video Call L and R channels. These sliders do not affect your recording levels if you’re recording each channel individually in your recording software.

Mixer Channels

Host

Adjusts the level sent from the Host microphone input to the Show Mix.

Guest (Vocaster Two only)

Adjusts the level sent from the Guest microphone input to the Show Mix.

Aux

Adjusts the level sent from the Phone/Device  input to the Show Mix.

Bluetooth (Vocaster Two only)

Adjusts the level sent from a Bluetooth Device connected to your Vocaster Two to the Show Mix. Your Bluetooth device’s volume buttons will also control the Slider’s level.

Loopback 1

Adjusts the level sent from Loopback 1 to the Show Mix. Loopback 1 signal will come from applications sending their audio to Software Playback 1 and 2.

Loopback 2

Adjusts the level sent from Loopback 2 to the Show Mix. Loopback 2 signal will come from applications sending their audio to Software Playback 3 and 4.

Show Mix

This is the main mix of all the Vocaster’s inputs. You can record the Vocaster Hub mix by selecting the ‘Show Mix’ inputs in your recording software. The slider adjusts the overall level to your recording software.