Focusrite Control software allows flexible mixing and routing of all audio signals to the physical audio outputs, as well as control of output monitor levels. Sample rate selection and digital sync options are also available from Focusrite Control.
Note
Focusrite Control is a application for many Focusrite interfaces. When you connect an interface to your computer and open Focusrite Control, the model of interface is automatically detected, and the software configured to suit the inputs and outputs, and other facilities, available on the hardware.
To open Focusrite Control:
Installing Focusrite Control on your computer places the Focusrite Control icon on the dock or desktop. Click the icon to launch Focusrite Control.
Assuming your Scarlett interface is connected to your computer with the USB cable, Focusrite Control appears as shown below (Mac version shown).
Please refer to the Focusrite Control user guide for further details. This is available from:
The following table provides the channel routings when preset option “Direct Routing” is selected in Focusrite Control.
|
CH NO . |
INPUTS |
OUTPUTS |
|---|---|---|
|
1 |
Input 1 |
Output 1 (Headphones 1L) |
|
2 |
Input 2 |
Output 2 (Headphones 1R) |
|
3 |
Input 3 |
Output 3 (Headphones 2L) |
|
4 |
Input 4 |
Output 4 (Headphones 2R) |
|
5 |
Input 5 |
S/PDIF 1 |
|
6 |
Input 6 |
S/PDIF 2 |
|
7 |
S/PDIF 1 |
|
|
8 |
S/PDIF 2 |
|
|
9 |
Loopback 1 |
|
|
10 |
Loopback 2 |
Please refer to the Focusrite Control User Guide for further details.